Scusate non so dove postare questa robetta che mi hanno emailato, sembra interessante, ce l'avevamo!? (Ho gogolato ma su LC ma non ho trovato nulla di simile) comunque belle le foto.

facciamo a: il primo che commenta traduce ...


Special Guest: Christopher A. Brown



We present images and analysis of the collapse of the WTC Twin Towers,
showing they were erected with in-built explosives which were used to
demolish them on 9/11. In this two hour BFN special report, our guest
Christopher Brown presents the case for demo build, explains the exact
techniques used to bring down the Twin Towers and shows how this is
fully consistent with what we all saw in their extraordinary collapse.

The 9/11 3i Investigation
The Next Level Show - 28th June, 2007

LISTEN:
Broadband Mp3 Audio
http://www.BreakForNews.com/audio/NextLevel070628a.mp3
Click to Play or Right-Click to 'Save As' and Download.

Dialup Mp3 Audio
http://www.BreakForNews.com/audio/NextLevel070628a.mp3
Click to Play or Right-Click to 'Save As' and Download.

Quote:
SHOW GRAPHICS

The following images, elements of hard
evidence are vital to an analysis that
actually explains what was seen, heard
and found at ground zero.

- Christopher Brown

No analysis of "collapse" (sic) can be accurate without a correct definition of the structure that stood. A massive deception has been foisted upon the public by presenting that multiple steel core columns existed inside the core area.

Figure 1 Here is the only actual image showing the officially presented core. Some people count 47 steel box columns represented there.




Here is a description of the photos that are misrepresented to complete the deception of the core structure. It will take 2 images to do that.

Figure 2 The first is the classsic helicopter photo of the top floor of a tower under construction. Someone else annotated this image but they were honest in their appraisal of the size of columns and only labeled the truly huge columns "MASSIVE". those columns were no in the core area and only surrounded it. What the misrepresentation does is attempt to call the vertical steel in the core "core columns". If that steel were "core columns" it would be super strong and be seen in every one of the above images in the core area. It is not ever seen in any 9-11 images.




Figure 3 Below is another image taken from the street level when the tower was but 5 or 6 floors tall. The vertical steel in the core area has a small plate welded to the top of it. It can be termed a "butt plate" and mates with another having identical bolt holes where the 2 are joined together. Totally inadequate for creating a core column as it has no ability to resist lateral loads. In reality the concrete was cast inside the core area and when the exterior steel framework had caught up and passed the elevator guide rail support steel and the concrete had cured, the elevator guide rail support steel was fastened to the inside of the concrete tubular core. So the guide rail support steel had to take compression loads but not lateral loads and but plates are suitable for that. Because the support steel was kept straight by being bolted to the inner concrete core walls, the elevators in the WTC were among the fastest in the world.




Figure 4 What actually stood was a steel reinforced cast concrete rectangular tube. Here is the WTC 2 core standing at around 400 foot tall.



Figure 5 Another image which provides proof of the concrete core is this image which shows the spire, off the north west corner of the WTC 1 core. To the left of the spire is an end view of the concrete shear wall of the WTC 1 core as viewed along the wall looking south.




The below images have a description of identities of these different smoke, dust and debris to be, and how they originated in the positions seen as the towers come down.

My analysis of these dust or debris clouds and their apparent location and behavior identifies the darker central plume as upwardly focused particulate primarily from the core area projecting with concentration directly upwards from explosives.

The interior box columns were cut every third floor by custom, optimized cutting charges built into the floors and were detonated approximately every 300 milliseconds.

Figure 6 Here is the smooth, square end of
the tempered steel columns found at ground zero.

Figura grande clicca
http://breakfornews.com/3i/algoxy_files/wtc066-crop.jpg


Figure 7
View Larger Original of the above photo: http://www.breakfornews.com/3i/images/wtc066.jpg[/img]



Figure 8 Close up with brightness and contrast enhanced



Near the second hour of the missing documentary, called "The Engineering and Construction of the Twin Towers" was a description of the below steel plates which were installed every 3rd floor in the towers. This documentary still exists, but only in the closets of Americans as forgotten VHS tapes. Only to be found by the truth movement inquiring with friends and relatives who are not 9-11 activists.

Figure 9 The steel plates configured as shown below, acting with plastic explosives sandwiched between them, and the documentary described forced evacuations of workers on the floors just after sandblasting prior to concrete application, can act as an optimized cutting charge and slice through tempered steel using the plates as guides and leave the precision smooth edges seen.



Such charges configured as above can leave even smoother cuts in far
thicker, harder steel that the linear shaped charge shown in the video
below.

Figure 10 Shaped Linear Charge Example:



Keep in mind that commercial linear shaped charges are currently limited
to 1 inch thickness from my limited research

Figure 11 Occasionally these charges were overloaded or perhaps the tube
above was blocked to cause a rupture. Evidence of such is documented and analyzed here.



Figure 12 The box column tube provided the vertical trajectory for the primarily metal particulate making the darker column over the top of the rest.

Figura grande clicca.
http://breakfornews.com/3i/algoxy_files/A0069b_3_towerexplo1_explosion_below-crop.jpg

To the left, above, arcing out and up at about 10:00, 10:30 O'clock are plumes of higher velocity particulate from the concrete core comprise of some larger hard stone aggregate. The origin of this material is from just off center. Front and center is a billowy very light colored cloud of dust which appears near the facing periphery and is comprised of the components of lightweight concrete such as vermiculite, fly ash and pumice.

Figure 13 Below, the image of the Amanzafar series has all the characteristics and the dark plume of iron based particulate, superheated from being cut with high explosives is quite pronounced. Left of that are clearly vertical and separate columns of smoke or particulate from the central concrete core area. The darkest plume of iron can be easily located as the south east side of the WTC1 core eastward of the lighter plume angling upward in front of it by the spire which was off the northwest corner of the core.



The spire was formed by deteriorated explosives on the north side of WTC1 which case failures to detonate leaving larger pieces of floors and beams connecting interior box columns and perimeter columns. In this image interior box columns of the south east side are undergoing cutting while concrete core walls are detonating along the south and west. Smaller more billowing dust clouds from floors are seen to the right and lower which appears as the source of airborne larger debris.




Figure 14 The last image is WTC 2 on the east face from the south. The dark particulate of iron is is strikingly symetrical. WTC 1 behind it is completely obscured by smoke and debris. As does the top image of WTC 2 a second earlier, this image on the adjacent south eastern corner shows the pronounced vertical valley of precision exploding concrete planes. In this image the uniformity and nearly complete ring of darker smoke over the lighter colored debris and dust shows the vertically ejected, super heated fine steel particulate of the cutting charges detonating and cutting the box columns ringing the core area. The box columns act as chimneys with forced ejection's of steel particulate until they are thrown outward by the descending core blasts. Expanding gases and displaced air from the core area force the widening column of dust upward as core detonations proceed downward.

This is a very unique explosion. The red line shows a vertical valley formed in the debris because of the 2 precision, exploding planes of the core walls with perpendicular alignments. The debris waves are moving perpendicularly away from each other so the valley forms. The yellow line shows the adjacent ridge to the valley or the far reaches of the parallel debris wave from the exploding plane. The exclusive very fine particulate in the quantities seen is quite unusual in any kind of blast and denotes extremely high pressures from optimum placement combined with optimum distribution of the explosive. The eyewitness reports of the type of sound is also consistent with very well contained blasts.